Two tables can look identical in a photograph and behave completely differently after five years. The difference is often hidden inside the joints.
What is a mortise and tenon joint?
One piece of wood has a rectangular hole, the mortise. The other has a matching projection, the tenon. The tenon fits snugly into the mortise and is held with glue, and sometimes a wooden peg or wedge. The result is a large gluing surface and a mechanical lock.
What other joints are common?
- Dovetail: interlocking, fan-shaped joints, often used in drawers
- Dowel joint: round wooden pegs aligning two pieces
- Half-lap or bridle joints: overlapped pieces for frames
- Screws and brackets: metal fasteners holding parts together
- Cam-and-dowel fittings: common in flat-pack furniture
Why joinery matters
Furniture is not static. It is leaned on, dragged, sat on and moved. Wood also expands and contracts slightly with humidity. Weak joints loosen under all of this. Good joinery stays tight.
Comparison
| Mortise and tenon | Screws only | |
|---|---|---|
| Strength | Very high, large glued surface | Depends on screw grip in wood |
| Long-term tightness | Stays firm for decades | Can loosen with movement |
| Repairability | Can be re-glued or re-pegged | May strip the wood |
| Production speed | Slower, needs skill | Faster |
| Look | Clean, no visible metal | Screw heads may show |
Where each is best
Mortise and tenon is ideal for table legs and aprons, chair frames and bed frames. Dovetails suit drawers. Metal fasteners have a place too, for knock-down furniture that must be moved or reassembled. Used well, they complement good joinery, not replace it.
How to spot good joinery
- Look at where legs meet the top or apron. Tight, even lines with no gaps are a good sign.
- Check the drawers. Dovetails or well-fitted joints at the corners.
- Rock the piece gently. It should feel solid, not wobbly.
- Look underneath. Quality shows even where it is hidden.
- Ask the maker. Specific answers are a good sign.
Does wood movement break joints?
Good joinery plans for movement. Tabletops are often attached with fittings that let the top expand and contract, so it does not split. Poorly designed rigid joints can crack as the wood moves.
Can screws be hidden?
Yes, and many fine pieces use both glue-and-joint construction and discreet hardware. The point is not to avoid all metal. The point is that the structure should not depend on metal alone.
Why it costs more
Hand-fitted joinery takes time and skill. That is part of why solid, well-made furniture costs more than flat-pack. You are paying for decades of tightness.
Questions to ask
- What joinery holds the legs and frame?
- Is glue used with every joint?
- How is the top attached?
- Can the piece be repaired later?
At Wootique, our carpenters build with traditional joinery wherever it matters. Visit our workshop or message us to see joints up close.




